SSMMS FOR STERILIZATION WRAP APPLICATION
SSMMS用于灭菌包布
布料用途
必得福的灭菌包布适用于包裹需要灭菌的医疗产品，如医疗工具包、织物等。必得福的灭菌包布适用于蒸汽或EO（环氧乙烷）灭菌，并与产品标签和灭菌指示标签相兼容。正确使用包布，可最大限度保持医疗用品使用前洁净无 菌。
生物相容性信息
必得福公司生产的SSMMS/SMMMS无纺布经生物相容性测试证明为无毒、不刺激皮肤、不致敏的无纺布产品。
ISO 11607, EN 868-2/ GB/T 19633.1, YY0698
必得福公司提供的灭菌包布材料SSMMS/SMMMS符合EN868-2：2009/YY 0698:2009第二部分《灭菌医疗器械的包装-灭菌包布的要求和测试方法》以及ISO 11607-1：2006/GB/T 19633.1：2009第一部分《灭菌医疗器械的包装-材料，灭菌 屏障系统和包装的要求》。
高阻隔性
灭菌包布具有优良的静水压性能，因此对液体和固体微粒具有高阻隔性。
良好的透气性
灭菌包布同时具备良好的透气性，适用于环氧乙烷和蒸汽灭菌。
低收缩率
灭菌包布具有低收缩率的特点。
优良的物理性能
灭菌包布具有良好的抗撕裂性和抗穿刺性能。
良好的悬垂性
灭菌包布也具备良好的悬垂性，柔软且容易包裹和打开。
Application
Beautiful Nonwoven's sterilization wrap is intended for use in packaging of the medical products such as instrument sets, linen, etc. prior to sterilization. The fabric is suitable for use with steam and EO sterilization and compatible with labels and tapes used to identify the products and to indicate their sterilization status. Beautiful Nonwoven's sterilization wrap keeps medical devices and healthcare facilities cleaner and safer.
Biocompatibility
SSMMS/SMMMS nonwoven fabric has been thoroughly evaluated and tested for biocompatibility and the fabric shows no toxicity and no skin irritation and does not cause any allergic reaction.
ISO 11607, EN 868-2/ GB/T 19633.1, YY 0698
Beautiful Nonwoven SSMMS/SMMMS nonwoven fabric complies with EN868-2:2009/YY 0698:2009 - Packaging materials for terminally sterilized medical devices, Part II: sterilization wrap - Requirements and test methods, and ISO 11607-1:2006/GB/T 19633.1:2009 - Packaging for terminally sterilized medical devices, Part 1: Requirements for materials, sterile barrier systems and packaging systems.
Superior Barrier Property
Beautiful Nonwoven SSMMS/SMMMS nonwoven fabric provides outstanding hydrostatic head properties and superb protection against fluids and particles.
Excellent Air Permeability
Beautiful Nonwoven SSMMS/SMMMS nonwoven fabric is highly breathable, suitable for Ethylene Oxide Sterilization and Steam Sterilization.
Low Shrinkage
Low shrinkage after exposed to steam sterilization.
Exceptional Mechanical Properties
Great resistance to tears and punctures.
Good Drapeability
Drapeable and super soft, easy and friendly to handle and work with.
灭菌包布典型材料物理性能数据表
Physical Properties of Nonwoven Fabrics for Sterilization Wrap
Technical Data Sheet
Description: 45gsm SMMMS Medical Blue (HBL-06) Non-treated
Tests are performed according to guidelines of EN 868-2: 2009 and ISO 11607
Physical Properties | Properties | Unit | Requirement | Test Result | Test Method |
Average Mass of 1m2 | g/m2 | ±5(2.75~47.25) | 45.3 | EN ISO 536:2012 |
MD Internal Tearing Resistance | mN | ≥1000 | 13000 | EN 21974:2012 |
CD Internal Tearing Resistance | mN | ≥750 | 5000 | EN 21974:2012 |
Bursting Strength (Dry) | kpa | ≥130 | 218 | EN ISO 2758:2003 |
Bursting Strength (Wet) | kpa | ≥90 | 220 | ISO 3689:1983 |
MD Tensile Strength (Dry) | kN/m | ≥1.00 | 2.14 | EN ISO 1924-2:2008 |
CD Tensile Strength (Dry) | kN/m | ≥0.65 | 1.31 | EN ISO 1924-2:2008 |
MD Elongation At Break (Dry) | % | ≥5 | 113.8 | EN ISO 1924-2:2008 |
CD Elongation At Break (Dry) | % | ≥7 | 95.6 | EN ISO 1924-2:2008 |
MD Tensile Strength (Wet) | kN/m | ≥0.75 | 2.02 | ISO 3781:2011 |
CD Tensile Strength (Wet) | kN/m | ≥0.50 | 1.28 | ISO 3781:2011 |
Resistance To Water Penetration 1 | cm H2O | ≥27.5 | 64.5 | EN 20811:1992 |
Microbial Barrier | Air Permeability | cm3/s/cm2 | ＞15 | 26.0 | ASTM D737-04 |
Cleanliness | mm2/m2 | / | 0 | TAPPI/ANSI T 437 om-96 |
Color Fastness | / | No color shall leach out of the wrap | No color leach out | EN 868-2:2009 4.2.1.1 |
PH Value | / | 5.5~8.0 | 7.0 | ISO 6588-2, hot extraction meth |
Chlorides Content | % | ≤0.05 | Not detected | ISO 9197 |
Sulphates Content2 | % | ≤0.25 | Not detected | ISO 9198:2001(MDL3=20PPM) |
Fluorescence | / | Fluorescent brightness:≤1% Fluorescent spots: ≤5 | Fluorescent brightness: 0.4%; Fluorescent spots: 0 | BS EN 868-2:2009, Annex B |
上述物理性能测试数值为典型值，仅作为布料性能指导，不作为产品的质量协议。
The physical properties mentioned above represent typical valu es of nonwoven fabric.
These values should not be considered as specification.
